These oil presses handle not only the most common oilseeds, such as rapeseed and sunflower seed, but also less common crops, such as jatropha, coconut, hemp, mustard, poppy, artichoke, evening primrose, sea buckthorn and grape seeds. Indeed, all the possibilities are open with these presses.
Besides vegetable oil production, cold pressing also yields press cakes, which are valuable feed for livestock.
Our oil pressing machines are ideal solutions for small and middle-scale farmers. They have low space requirements, but offer top performance.
Oilseeds Screw Presses – UNO, DUO

The expeller presses Farmet UNO and Farmet DUO are intended for cold pressing of oilseeds without any preceding seed treatment. These presses are designed with respect to a high oil yield while maintaining the dietetic qualities of the oil. Target crops are all the common and less common oilseeds, even those with oil content more than 10 %.
Technology Description
The UNO and DUO presses are expeller presses for oilseeds. As the screw shape changes, compression of seeds occurs inside the press, which leads to a gradual separation of the oil from the seeds. Eventually, the oil seeps out through the outlet slits.
The drive can be equipped with an integrated frequency converter with a revolution counter. Changing the revolutions can optimize the pressing process for different oilseeds species.
Technical Parameters
The presses UNO and DUO are small capacity presses that reach a performance of 8-24 kg per hour. The design routinely meets EU specifications; however, it can be adjusted to wiring requirements from local markets (e.g. USA, Canada, etc.). The presses can be equipped with a converter for changing revolutions of the main drive, which allows optimization of the pressing process. The presses are equipped with motors with power output of 1.1-3 kW, depending on the technology.
Complete Oilseeds Pressing Unit – Farmer 10, Farmer 20

The pressing sets Farmer 10 and Farmer 20 are compete pressing units intended for cold pressing of oilseeds and subsequent filtration. Don’t be dependent on major crushers. This technology is ideal for those who wish to produce their own vegetable oil and feed, as it produces high-quality filtered vegetable oil and press cakes. These can be used as an adequate substitute of extracted groats. Moreover, thanks to their higher fat content, these press cakes have a comparably higher feed value.
Technology Description
The set consists of either UNO or DUO press equipped with a hopper for oilseeds. Beneath the press there are plastic sedimentation tanks for expelled oil. A pump placed on the construction transports the oil from the sedimentation tank into the plate filter, which collects extra solids from the oil.
Technical Parameters
The press sets Farmer 10/20 are comprehensive solutions for small-scale oilseed pressing that reach a performance of 8 – 24 kg per hour. The design routinely meets EU specifications; however, it can be adjusted to wiring requirements from local markets (e.g. USA, Canada, etc.). The presses can be equipped with a converter for changing revolutions of the main drive, which allows optimization of the pressing process. The press sets are equipped with motors with power output of 1.6-3.5 kW, depending on the technology.
Oilseeds Pressing Unit – FLS

Pressing units offer wholly new possibilites in scaling and quality of special oilseed processing. Thanks to the arrangement of the presses DUO, the set offers a considerable increase in the production of high-quality cold-pressed oil.
This technology offers an ideal solution for those who are interested in producing their own oil and feed. End products are high-quality filtered vegetable oil and press cake. The cake can be used as a full-fledged replacement of extracted meal. However, thanks to a higher oil content, the cake has an even higher nutritional value.
Technology Description
The press set FLS consists of a battery of two DUO presses, above which there is a hopper for oilseeds. Below the presses are located sedimentation tanks for the expelled oil. A pump, mounted on the construction frame, transports the oil from the sedimentation tank into a plate filter, which retains remaining solids from the oil.
Technical Parameters
The press sets FLS 40/60 represent complete solutions for oilseed pressing at smaller capacities, reaching performance between 16-72kg/hr. As standard, they are designed to meet the EU wiring specifications; however, they can be adjusted to the wiring requirements from local markets (e.g. USA, Canada, etc.). The wiring can be equipped with a frequency controller of the revolutions of the main drive, allowing for further optimization of the pressing process. The press sets are fitted with motors of input power 1.6 to 3.5 kW, depending on the technology.